Specification:
◆ Detection channel: 1-8 (sustainable expansion as required)
◆ 10.1-inch capacitive full touch color screen.
◆ Frequency range: 5 Hz ~ 12MHz, continuously adjustable; Multiple independent frequencies (optional), optional sorting can be single frequency, 8 frequencies optional (each channel up to 16 software frequencies optional);
◆ Gain range: 0.0dB ~ 99.0dB continuously adjustable, step: 0.1dB; Fine-tuning, rapid increase/decrease;
◆ Gain ratio: (X/Y) 0.1 ~ 10.0; Continuously adjustable, can be fine-tuned, rapid increase/decrease;
◆ Signal to noise ratio ≥10dB (up to 30db);
◆ Phase rotation: 0 ~ 360° continuously adjustable, step: 1;
◆ Adjustable probe drive (excitation) grade: 1 ~ 16;
◆ Filter coefficient: 0-10000;
◆ Adjustable detection range, that is, the maximum measurement value: 10 ~ 10000, step 1;
◆ Hardware amplification factor: 1dB ~ 39.9dB continuously adjustable, step: 1dB;
◆ Multiple incentive modes: DP/DI; Can be configured with differential, absolute and all kinds of customized special probes.
◆ Probe abnormal alarm function (optional)
◆ with fast digital balance function;
◆ Solid line, blanking display mode is flexible and optional;
◆ Blanking display coefficient: 1 ~ 400;
◆ Digital filter: low-pass (0Hz ~ 2000Hz) high-pass (0Hz ~ 2000Hz); Using a unique "digital filter", effectively suppress the field interference signal, to ensure the accuracy and stability of detection;
◆ Stability: 16 hours ≦2dB;
◆ With end, end and tail signal cutting function, effective control end and tail blind area (need peripheral support);
◆ Alarm duration is adjustable: 10ms ~ 60000ms, step by 1ms;
◆ Leakage rate: ≤0%, misjudgment rate (mistakenly judged qualified products as unqualified products)≤1%; ◆ Flexible internal and external clock selection (optional);
◆ Real-time software/hardware alarm, a variety of alarm window modes (round, square, fan, custom), with alarm, forecast alarm function;
◆ non-constant amplitude, asymmetric phase alarm area setting;
◆ A variety of display modes: impedance, time base, AB sweep, 8 frequency sorting, analog 3D display (optional depending on the model);
◆ Can store a large number of testing programs and testing data;
◆ Eddy current signal playback expansion function, measuring the amplitude, phase, digital value of the defect;
◆ Cartesian coordinate system and polar coordinate system background selection;
◆ Automatically form a test report (including test quantity, test personnel, test parameters, qualified number and unqualified number, etc.) (peripheral support required);
◆ One-click switch between Chinese and English operating languages, no additional installation of the operating system, online help;
◆ Working environment: Power supply: AC 220V/110V;
◆ Operating temperature: 0℃ ~ +45℃, storage temperature: -20℃ ~ +50℃, relative humidity: ≤85%;
◆ can display the profile of the inspected pipeline in service, the line number of the inspected pipe, and the eddy current detection signal (optional) on the same screen;
◆ Graded marking pipeline profile to form an overview of in-service pipeline eddy current testing (optional); ◆ Graded statistical test results (table and histogram display), easy to accumulate analysis of test results (optional module);
◆ Optional data analysis system (optional)
◆ Automatic calendar, time display;
◆ Working environment: Power supply: AC 220V/110V; Operating temperature: -10℃ ~ +45℃, relative humidity: ≤85%;
◆ Battery continuous working life of 6H (depending on the working environment).
◆ Appearance size and weight: 280*190*70mm (L*W*H), weight: < 2.5kg.
