Application：
Automatic Metallographic specimen mounting press is a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the hot mounting (thermo-hardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
Features：
● Electric loading of pressure
● Equipped with water cooling system
● According to different requirements of the material, there are four kinds of moulds (Ø25mm, Ø30mm, Ø40mm, Ø50mm) that can be chosen to meet the demands at will.
● Equipped with middle mould. It is available to prepare two pieces of specimens at the same time, the capacity is doubled.
Technical Technical Specifications
Model
METPRESS-4A
Diameter of specimen
Ø25mm, Ø30mm, Ø40mm and Ø50mm
Heating temperature range
35-200℃
Hold Time
1~99 min
Automatic cooling time
0~60 min
Cooling method
Water Cooling
Maximum Consumption
1650W
Dimension and Net Weight
625*583*565mm,82kg
Package Size and Gross Weight
915*710*797mm,105kg
Power Supply
single phase, 220V, 50Hz
