How Does the KASON PIT302W Computer Control Impact Testing Machine Meet ISO 148, ASTM E23 and EN 10045?

Main features:

Impact toughness is one of the most decisive properties for structural steels used in pressure vessels, bridges and offshore structures, and verifying it requires a Testing machine that is both accurate and repeatable. The KASON PIT302W computer control semi-automatic Charpy impact testing machine was developed for exactly this purpose: determining the anti-impact capability of metal materials under dynamic load.

The instrument is supplied with two pendulums, 150 J and 300 J, mounted on a single supporting column with a cantilever-type, U-shaped pendulum body. The distance between the pendulum shaft and the impact point is 750 mm, impact speed reaches 5.2 m/s and the raised angle is 150 degrees, while angle accuracy is held to 0.1 degree and the minimum reading value is 1 J. The standard span is 40 + 0.2 mm with a jaw radius of R1-1.5 mm, and standard specimens measure 10 mm x 10 (7.5/5) mm x 55 mm.

Operation is managed from an English-language computer program. Zero clearing, pendulum rising, impact, specimen feeding and automatic return are performed with a mouse click. The system captures absorbed impact energy and pendulum cycles, then monitors, stores, calculates and prints the results. Energy loss, impact tenacity, rising angle and Test averages can be presented as curves and reports, while a dial gauge provides an independent visual reading.

The machine is built to ISO 148, EN 10045, ASTM E23, GB/T 3808-2002 and GB/T 229-2007. A semi-closed protection cover, safety guard pin and safety net protect the operator, and the unit runs on 3-phase AC 380V, 50 Hz. It measures 2144 x 736 x 1390 mm and weighs 550 kg, fitting comfortably into routine quality control laboratories and third-party Testing centers.

KASON PIT302W computer control impact testing machine

KASON PIT302W computer control impact testing machine (150 J / 300 J dual pendulum)